Bosh LTC-0485

Description

The LTC 0485 Series of High Performance 1/3-inch Digital CCD Color Cameras create the best possible image, even under the most difficult light and scene conditions. Based on unique 15-bit digital video processing technology and employing XF-Dynamic, these cameras provide excellent sensitivity with extended dynamic range.

By employing the best 1/3-inch CCD available, advanced front end processing, combined with the outstanding Dinion DSP, the cameras achieve an astonishing sensitivity, providing better color images in low light situations and sharper daytime images. Intelligent White balance algorithms, supported by a White Balance Hold function and even full manual white balance, ensure the most accurate color reproduction possible.

All Dinion cameras are supplied ready to operate. Simply attach and focus the lens, and connect power to provide optimal pictures under virtually all scene conditions. No tools are required for back focus and power connection. For extra challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and On-screen Display (OSD). Also, to aid installation, the camera automatically detects the lens type, and using the Lens Wizard ensures accurate (back) focusing for perfectly sharp pictures at all times

Features

• 15-bit DSP technology
• 540 TVL resolution
• Extended dynamic range
• Bilinx Technology
• Video Motion Detection
• SensUp
• Auto Black
• Default Shutter
• Back Light Compensation
• Programmable Modes
• NightSense

Specifications

Active Pixels	768 H x 492 V
Sensitivity	3200 k
Sensitivity Full video	2.4 lux (0.24 fc)
Sensitivity 50 IRE1)	0.59 lux / 0.24 lux (NightSense)
Minimum Illumination	0.24 lux / 0.10 lux (NightSense)
Minimum Illumination with Sens up	(0.0024 fc / 0.0010 fc (NightSense)
Horizontal Resolution	540 TVL
Signal-to-Noise-Ratio	50 dB
Video Output	1 Vpp, 75 ohm
Y/C Output	Y: 1 Vpp / C: 0.3 Vpp
Synchronization	Internal, line lock, HV-lock and genlock (Burst lock) selectable
Electronic Shutter	Auto (1/60 (1/50) to 1/500000), fixed, flickerless, default
Sensitivity up	Off, automatic continuous up to 10x
Auto Black	On, off selectable
Range	32x dynamic range enhancement
Dynamic Noise Reduction	Auto, off selectable
Contour	Sharpness enhancement level selectable
BLC	Off, area and level selectable
Gain	Auto (maximum level selectable to 28 dB) or fixed level selectable
White Balance	ATW (2500 - 10000 K), AWB hold, Manual WB selectable
VMD	4 area, sensitivity selectable
Alarm Output	VMD or Bilinx
Alarm Input (TTL)	Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay	max. 30 VAC or +40 VDC, max. 0,5 A continuous, 10 VA
External Synchronal Input	75 ohm or High Impedance selectable

[*productPDF:ifnotempty=``*]